Summer is here, and winter has ended. You have probably already turned on your HVAC. So, it is the time to prepare your unit. Your HVAC system may be damaged if it is left unattended for months. Here’s why HVAC maintenance is essential.
A system that is regularly maintained will be fine even if it has been inactive for months. And it is crucial to hire an HVAC contractor in Knoxville TN in order to prepare your unit for the summer.
The best way to keep cool in summer is with professional A/C maintenance and inspection. And there are other things you can do than just call a professional. Here are some things you can do:
Summer HVAC Maintenance Tips
Here are 5 ways to ensure your HVAC is running smoothly in summer:
Change the filter
Firstly, clean your HVAC system’s reusable filter if it comes with one. If your HVAC system has a replaceable filter, it is best to change it as soon as possible. The air filter will collect particles from the air, such as pollen and dust. So, the air filter can become clogged over time and the system is unable to circulate the air effectively. The filter must be cleaned or replaced to restore normal air flow.
Keep the outside unit clean
Moreover, the outside unit is the place where heat transfer happens. The air conditioner takes heat from the air inside and transfers it outside by evaporation or condensation. The heat is dissipated from the outside unit. So, you must keep it clean.
Clean the condensate drainage
Furthermore, condensate is formed on the coils by condensation and evaporation. The condensate will then drain from the coils via the drain. The condensation can cause the drain to clog. So, mold can form in the condensation drain if there is a constant supply of moisture when the unit turns on. The condensation drain should be cleaned regularly.
Verify the refrigerant level
Additionally, you can test the system’s refrigerant levels even without tools. After the unit is turned on for a while, touch the copper coils running through it. If the coils feel cold and produce condensation when touched, it is likely that there is enough refrigerant. So, call J.C.’s Heating and Air if it does not feel cold, even when the thermostat is set to cool.
Check that the condenser unit has been leveled
Then, double-check to make sure the condenser unit has been levelled. Do not eyeball it. To get an exact reading, use a spirit level. So, to make sure the surface is level, add gravel or other materials. And to ensure your family stays cool this summer, hire an HVAC contractor.
Inspect ductwork for leaks
Moreover, check your ductwork for indications of leaks or damage. Leaky ducts may lead to wasted energy and reduced cooling efficiency. So, seal any leaks with mastic sealant or a duct tape to improve airflow and energy efficiency.
Program your thermostat
Lastly, consider programming your thermostat to optimize energy usage while keeping your home comfortable. Set higher temperatures when you’re away or asleep to save on energy costs, and lower temperatures when you’re at home and active.
By following these additional steps for HVAC maintenance in Knoxville TN, you can help ensure your HVAC system operates efficiently throughout the summer, keeping your home cool and comfortable.
Call J.C.’s Heating and Air now. Our team will make sure that your system is ready for summer. Whether it’s HVAC maintenance, repair, or installation, our team can help.
Like our Facebook page for more great info about heating and cooling services.
Areas Served: Corryton, Fountain City, Halls Crossroads, Farragut, Powell, Knoxville, Knox County, Oak Ridge, Lenoir City
