air conditioning contractor in Knoxville TN
When you want your home to beat the heat, you need an air conditioning contractor who cares about your comfort. In fact, your air conditioning contractor is essential for ensuring that your central air conditioner is maintained and ready for summer. Therefore, it is smart to schedule an annual checkup during spring, and consequently, your air conditioning contractor can guide you through simple maintenance tasks.
Tips from Your Air Conditioning Contractor
Safety First
Before you begin any maintenance work, you should always turn off the circuit breaker. Also, ensure that the power supply to the condenser at its service panel is off. In addition, a 240-volt weatherproof disconnect box is typically found next to the condenser, and thus, your HVAC contractor will advise you to switch off this device as well.
Clean the Filters or Replace Them
If your furnace or air-handler filters become clogged, then you must clean or replace them at least once a year. Furthermore, these filters can block airflow and decrease your air conditioner’s efficiency, so your air conditioning contractor recommends regular inspections. Additionally, clean filters help avoid recirculating dust throughout your home.
HVAC companies in Knoxville TN
Clean the Condenser Coils of the Air Conditioner
It is important to clear your central air conditioner’s fan and condenser coils of dust. For instance, if your condenser unit was not covered during winter, you will need to remove more leaves and yard debris. Therefore, your HVAC contractor in Knoxville TN suggests inspecting the coils carefully to ensure no buildup of dirt, and then cleaning them using a soft brush or vacuum with a brush attachment.
Clear and Clean Debris
Next, you should clear away all debris and leaves from the base of your condenser. In addition, ensure that any drains on your air conditioner unit are clear. As a result, using a vacuum cleaner or a rag to clean the fan blades of your blower will help maintain efficiency. Consequently, your air conditioning contractor in Knoxville TN advises reassembling your condenser only after it has been thoroughly cleaned and dried.
Check Out the Coolant Lines
Then, inspect your air conditioner’s refrigerant tube that runs from the evaporator on your air handler to the condenser outdoors. Also, check the foam insulation covering these lines for any signs of fraying or missing areas. Accordingly, your air conditioning contractor in Knoxville TN recommends replacing the insulation if necessary, either by using foam insulation sleeves or by wrapping it with foam insulation tape.
Test the Unit: Air Conditioning Contractor Approved Steps
After you have dried the unit thoroughly, you must test your air conditioner unit. For example, first turn the power off to your condenser, then switch your thermostat to off. Next, turn on the power at the main panel and the disconnect box, and finally, adjust your thermostat to cool.
Additionally, remember that the furnace blower or air handler circulates the chilled and dehumidified air through your ductwork. As a result, if you encounter any issues, your air conditioning contractor advises that repairs should be handled by J.C.’s Heating and Air, even though many cleaning and maintenance tasks can be done on your own.
Looking for a reliable air conditioning contractor? Call J.C.’s Heating and Air now. We offer quality HVAC services.
Like our Facebook page for more great info about heating and cooling services.
J.C.’s Heating and Air
3110 Henson Rd Suite 7
Knoxville, TN 37921
865-388-1712
https://jcsheatingandair.com
Areas Served: Corryton, Fountain City, Halls Crossroads, Farragut, Powell, Knoxville, Knox County, Oak Ridge, Lenoir City
